High Pressure Washer Prices 2022 | Cost of pressure wash house, deck and garage (2023)

FAQs

How much do I charge to pressure wash a deck? ›

It typically costs between $0.08 and $0.35 per square foot to do pressure washing. This figure depends on the average rates in your region. A pressure washer will charge $0.40 to $0.80 per square foot if there are problems like stains, dirt, or mold that take longer to clean, according to CostHelper.

A larger space will take longer to clean, and more cleaning solution may be needed. The cost to pressure wash a house is $0.10 to $0.50 per square foot, according to Angi, making the total price for a typical house $100 to $650.

50/sqft. The price of pressure washing can vary depending on your area, contractor pricing, and what you want to be done. The average price for pressure washing a house is $0.25 to $0.50 a square foot. The average cost of power washing a house is around $400 to $900.

Expect to pay an average cost of $5.50 per square foot to have your deck power washed and stained or painted. If your deck is in excellent condition, the cost might be a little lower.

It typically costs $150 to pressure wash a deck. A small deck in relatively good condition can cost as little as $90 to power wash, while a larger 700-square-foot deck in substandard condition that needs hand brushing and power washing can cost $770 or more.

This could be a lucrative side gig or a full time operation. Consider that the average pressure washing costs between $192 and $401 per job. If you did two jobs a day at $250 each, you'd make $130,000 a year working 260 days per year. That's good money and a lot of time off to enjoy it.

Choosing a Pressure Washer

Vinyl siding can withstand a powerful gas pressure washer (2,500-3,000 psi). Aluminum, stucco or soft-grain wood homes will do better with a less powerful washer (about 1,200-1,500 psi).

The main difference is that power washing uses highly pressurized steam to do the cleaning while pressure washing just uses unheated tap water, without the help of a heating element.

Medium Duty 2000-2800 PSI

You can use a medium-duty pressure washer for almost any surface. They're great for cleaning concrete, brick, and wood. They work especially well for cleaning patios, sidings, roofs, decks, and fences.

How long does it take to pressure wash a 2000 sq ft house? ›

For example, a 2,000 square foot home can take anywhere from one to three hours to power wash.

Common Pressure Washing Pricing FAQs:

The typical pressure washing price is $. 20/sqft for residential houses and roughly $. 15/sqft for concrete surfaces.

A contractor will charge around $1 to $2 per square foot to stain a new deck while refinishing and restaining a deck can cost between $4 and $6 per square foot or more.

However, the average cost to have a pro stain a deck ranges between $1.75 to $4.50 per square foot if the deck has been regularly maintained. If the deck is in really bad shape, powersanding, powerwashing and staining it can be much more expensive reaching up to the $6.00 per square foot range.

HGTV recommends working with the lowest pressure that cleans your deck materials gently: about 500 to 600 psi for soft woods like cedar or pine, and up to 1200 to 1500 psi for pressure-treated wood. Amabile likes a 2000 psi machine, which Home Depot rents for $38 per day. You'll need a wide nozzle of 15 or 18 degrees.

Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result. A good deck cleaner can remove the gray fibers, dirt, mold, mildew and other impurities deep in the wood.

The short answer is 48 hours. You should wait at least two days after pressure washing your deck before you consider staining it, to give time for it to dry.

How much do pressure washer businesses make per day? The average salary for pressure washers is $44,520 per year, which translates to $21.40 per hour. The top 10% of pressure washers earn as much as $62,393 per year or around $30 per hour.

For a basic wash, the average prices are usually between $5 and $10. Add-ons such as a spray wax application or undercarriage wash may be an additional $1 to $2 each. Deluxe wash: Most automatic car wash businesses offer several tiers of services, including one or two packages that go beyond a basic wash.

A pressure washer's cleaning power is measured by a PSI (pounds per square inch) and GPM (gallons per minute) rating. PSI measures the pressure, or cleaning force, of water created through the pressure washer. Use the PSI rating to help you determine how powerful the water stream will be.

How much should I budget for a pressure washing business? ›

Your power washing business could cost anywhere from $500 to $15,000 to start, all depending on the scope of your business and what pressure washing services you intend to provide. This low startup cost makes the pressure washing business a great business to operate as a side hustle for some additional income.

One of the best pressure washers for commercial use is the Vortexx Professional 4000. The Professional 4000 has a powerful GX390 Honda Engine, with an RR Series AR Pump. This Professional Pressure Washer can produce a stout 4000 PSI at 4 gallons per minute and comes with Vortexx COOLFLO™ technology.

Concrete cleaning calls for powerful pressure washers featuring high pressure levels of 3000 PSI. However, if you will be using the power cleaner to maintain a range of surfaces in addition to concrete, choose one with adjustable pressure levels and set it to about 3000 PSI when you need to clean concrete.

Generally if you stay around the 1500 PSI to 1800 PSI range, and use the wide stream nozzle, you have less chance of damaging anything you are cleaning. Fortunately, you don't always need a power washer to clean most things around your home's exterior.

Medium Duty: Medium-duty pressure washers generate between 1900 and 2788 PSI, typically at 1 to 3 GPM. Best for home and shop use, these sturdier, more powerful units make it easy to clean everything from exterior siding and fences to patios and decks.

Concrete and asphalt require more cleaning power. You'll want to use the turbo nozzle on the 1600 PSI for hard-to-clean driveways, sidewalks, and patios as well as brick paving. For wood decks and painted surfaces, switch to the gentler 40-degree nozzle.

An electric pressure washer is a great option if you're looking for a practical tool for general cleaning jobs. As we've explained earlier, electric machines are powerful enough to clean off most dirt and grime, including old paint, mold, grease, plant residue, and much more.

We never recommend using a pressure washer while you're perched on a ladder because blowback could throw you off balance. The powerful stream of water can also loosen roof shingles, and if your shingles are asphalt, it can strip them of the embedded granules that help extend the life of your roof.

Ensure proper cleaning by spraying concrete with a bottle of spray degreaser, keeping a distance of 6 inches from the surface. Scrub degreaser into the concrete using a stiff brush or pressure-washer attachment tool.

Medium-duty pressure washers produce 2,000 to 3,000 PSI and can be used to remove grease and grim from concrete, sidewalks, decks and siding. Heavy-duty pressure washers produce 3,000 PSI or more, and can be used to clean large areas quickly, remove stubborn stains or patches of rust, or to strip paint.

Is 2500 PSI enough to clean concrete? ›

What PSI pressure washer do I need to clean concrete? To clean concrete effectively, use a power washer with a pressure rating of at least 3000 psi and a flow rate of at least 4 gallons per minute (gpm).

Which is more important PSI or GPM? PSI and GPM are both equally important when choosing a pressure washer. The PSI refers to the amount of pressure and GPM refers to the flow. You must have the correct combination of PSI and GPM to have the most ideal pressure washing system for your needs.

Best Time of Day to Power Wash

House washing can be performed at basically any time of the day, as long as you have sufficient light needed to safely complete the job. Extreme summer heat can make it difficult to properly wash your house, especially while working with certain chemicals.

Using a garden hose, spray only the section of siding that you're working on with water. Spray using a downward motion to avoid forcing water underneath the siding, where it could cause damage and rot. Using a scrub brush and the TSP/water cleaner, scrub the siding to remove the grime and dirt.

Using a garden hose is the best method if the house isn't very dirty, or if your house is made out of brick, stucco, or delicate wood shingles. Pressure washing is the way to go if your house has difficult stains. Vinyl, wood siding, and hybrid materials can withstand pressure washing.

Residential driveway and patio pressure washing will cost an average of $0.18-$0.30/square foot. Most standard 2-car driveways will cost between $150-250. Small patio pressure washing will typically range from $75-$150.

The pressure washing business is very profitable in Florida. The market is expected to grow at a CAGR of over 4 percent during the period 2019-2025.

As of Feb 3, 2023, the average annual pay for a Pressure Washing in Florida is $22,298 a year. Just in case you need a simple salary calculator, that works out to be approximately $10.72 an hour.

How many square feet will 5 gallons of deck stain cover? With 5 gallons of deck stain, you can cover around 875 ft² of deck area. This result is an approximation — it depends on the type of wood and the number of coats you plan to apply.

In general, an oil-based deck stain will last the longest, but it also depends on the type of wood, the weather conditions, and how long the deck has gone unprotected before staining.

How much should I pay to have my deck power washed? ›

Homeowners can expect to pay between $90 and $770 to power wash their deck, with the average pressure-washing cost coming in at $150.

Average Cleaning Cost

The average cost to pressure wash a deck is typically around $195 for having a 500 square foot deck cleaned by a pro with a power washer. Decks with rails, stairs and other complexities cost closer to $240. Other factors are listed below.

The Best Time To Clean Your Deck

A solid standard is to aim for cleaning your deck when the outside temperature remains at 52 degrees fahrenheit or above both at night and during the day, and when it likely won't rain for a period of at least several days.

Generally speaking, a good principle is to have the deck pressure-washed when the temperatures remain above 52 degrees both at night and during the day without rain or other condensation for several days. This allows the deck to dry as quickly as possible.

Using too much pressure

One of the quickest ways to do damage to your deck is by blasting it with a high-pressure power washer. Using too much pressure can scar the wood, leaving unsightly marks. Damage to the wood that weakens it in spots could eventually lead to structural damage.

Selecting a pressure washer with a range of 2,000 psi to 4,000 psi will give you the most effective power for removing peeling paint.

The national average in terms of material cost for a deck cleaning is about 10 cents per square foot. The labor cost is an average of about 51 cents per square foot. Therefore, an average 300 square foot deck would cost, on average, $153 to have pressure washed.

For cleaning a wooden deck, you'll be best served by using the lowest pressure setting that's still effective. For soft woods like cedar or pine, this is usually about 500 to 600 psi. For harder woods, it can go up to 1200 to 1500 psi.

How long should you wait for your deck to dry after you power wash it? The short answer is 48 hours. You should wait at least two days after pressure washing your deck before you consider staining it, to give time for it to dry.

The deck must be dried for at least twenty-four hours before painting or staining; forty-eight hours is ideal. Do not paint or stain a deck if there is high humidity or the temperature is above seventy-nine degrees.

What kind of pressure washer do I need for deck? ›

Rent a pressure washer

A pressure setting of 1,000 to 1,200 psi is ideal. Too much pressure will damage the wood and make the wand harder to control. Rent a unit that allows for the intake of chemical cleaners (deck stripper and wood brightener) so you can spray them on through the wand.

To avoid damaging your decking, create a gentle cleaning solution with warm water and liquid dish soap. Alternatively, you can use a speciality wood deck cleaner. Saturate the surface and scrub the deck with a stiff-bristled brush or sponge until the cleaning solution starts to lather.

Vinyl siding can withstand a powerful gas pressure washer (2,500-3,000 psi). Aluminum, stucco or soft-grain wood homes will do better with a less powerful washer (about 1,200-1,500 psi).

What PSI pressure washer do I need to clean concrete? To clean concrete effectively, use a power washer with a pressure rating of at least 3000 psi and a flow rate of at least 4 gallons per minute (gpm).

Hardwood decking - Hardwood decking can typically withstand a bit more pressure than softwood. When pressure washing a hardwood deck, stick to between 1,200 and 1,500 PSI to prevent accidental damage to your decking.